EPDM rubber waterproof membrane underlayment with fabric backed
It can be pasted on to the cement floor right.
EPDM waterproof membrane is created from ethylene propylene diene monomer (EPDM), introducing into some chemical auXiHu (West Lake) Dis.liaries, for illustration, carbon black, nanophase modifier, plasticizer, vulcanization accelerator and other individuals, it is one variety of polymer watertight membrane with superb overall performance elasticity.
| Thickness(mm): | 1.2mm, 1.5mm, two.0mm |
| Allowable deviation(%): | -ten to +fifteen |
| width(mm): | 1000, 1200 |
| Duration / roller: | 1200mm or Custom-made by the buyers’ requirments. |
Specification:
| No. | Objects | JL1 | JL2 | |
| one | Tensile Power (MPa) | 23 ordmC | ge7.five | ge4. |
| sixty ordmC | ge2.3 | ge0.eight | ||
| two | Breaking EEPTation | 23 ordmC | ge450% | ge400% |
| -20 ordmC | ge200% | ge200% | ||
| 3 | Tear Energy kN/m | ge25 | ge18 | |
| 4 | EPTermeability, .3Mpa, thirty minutes | No leaking | No leaking | |
| 5 | Reduced Temperature FleXiHu (West Lake) Dis.bility | -40 ordmC | -30 ordmC | |
| six | Thermal Stability (mm) | Increase | le2 | le2 |
| Shrink | le4 | le4 | ||
| 7 | Very hot Air Getting older (eighty ordmC times168h) | Tensile Retention | ge80% | ge90% |
| Breaking EEPTation Retention | ge70% | ge70% | ||
| 8 | Alkali Resistance, Saturated Ca(OH)two Resolution, 23 ordmC times168h | Tensile Retention | ge80% | ge80% |
| Breaking EEPTation Retention | ge80% | ge90% | ||
| 9 | Ozone Aging(40 ordmC times168h) | EEPTation forty%, 500pphm | No crack | No crack |
| ten | Artificial Weathering Growing older | Tensile Retention | ge80% | ge80% |
| Breaking EEPTation Retention | ge70% | ge70% | ||
| 11 | Bonding Peel Strength (Sheet and Sheet) | N/mm (StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Test Circumstances) | ge1.five | ge1.five |
| Soaking Retention Price(23 ordmC times168h) | ge70% | ge70% | ||
Features
1) It can be utilized to the cement fundation right.
2) Very good weather fastness and dimensional balance.
three) Superb functionality to high and low temperature (-40 ordmC ~ +80 ordmC), EPTresistant and anti-corrosion.
4) Greater tensile energy and better extensibility unEPTnormal design circumstances.
5) Easy installation, strong joint, and no environmental air pollution.
6) Great rooting penetration resistance.
Software:
1) Roofs, basement, toilet, bridge, underground, tunnel and dam.
two) EPT and civil constructing watertight.
3) Geo-synthetic liner for swimming pool, channels, irrigation system
4) EEPTly for projects with large demands in sturdiness, anti-corrosion and deformation.
Building Strategy:
1). Ensure all surface area are clear,dry and dust-totally free. Get rid of any free particles and any rust with a wire brush amp soft broom.
two).Roll out the membrane.
3).Remove the backing paper and location the adhesive aspect to the formerly prepared surface.
four).To ensure a tigEPT speak to-clean the EPT down with a dry cloth, remocing all the air bubbles
5).Push the EPT to the surface area firmly after in place.
6).Smooth flat all edages with a wallpaper roller or trowel.
7).Following use reseal pack and keep uprigEPT in cool,dry issue.
Storage and Transportation:
one) Watertight resources must be stored unEPTdry and ventilated conditions.
two) Different types of membranes should be piled independently.
three) UnEPTusual problem, storage period is 1 12 months given that production date.
4) Watertight supplies should be place vertically throughout transportation.
5) It need to be retained away from sunshine and rainwater.
six) Transportation and storage approach must be away from the fireplace source, storage temperature does not exceed 35 ordmC, the storage time period is one year.
