BOPP Thermal Laminating Film

BOPP Thermal Laminating Film

*Substance

Surface area layer: BOPP
Glue layer: EVA adhesive

*Specification

Thickness: 18mic/20mic/22mic/23mic/24mic/25mic/27mic/28mic/30mic/35mic
Width: 300~1800mm
Length: 200~3000m
Paper core: 25.4mm (one inch), 58mm(two.25inches), 76mm(3 inches)
Bonding: Significantly less than 2

*process parameter:

Equipment for thermal movie: Dry and damp movie laminator
Lamination temperature: 95~105c
Roller strain: 10-20mpa
Pace: 8-20 m/min

*instructions for utilizing BOPP thermal laminating movie:

Normal process temperature is 90c-105c, roller force and temperature vary with distinct sorts of paper, ink and EPTs.
When using the movie for the initial time or do other remedy, try a modest volume just before mass laminating.
Make sure the ink is dry prior to laminating. It will delaminate when the paper is made up of too a lot dampness and powder.
Make positive place the material in a reduced-temperature, dry location.

*EPT:

SPECIFICATION 20mic 22mic 24mic 25mic 27mic 28mic 30mic
GLOSS GLOSS GLOSS GLOSS GLOSS GLOSS GLOSS
THICKNESS (mic) Foundation 12 12 12 15 fifteen eighteen eighteen
ADHESIVE eight 10 twelve ten 12 10 12
Whole 20 22 24 twenty five 27 28 30
WEIGEPT m2/kg fifty four.three 49.three 45.045 forty three.38 40.11 38.789 36.fifteen
kg/m2 .01844 .57132 .5712 .57105 .57193 .57178 .57166
WIDTH(mm) 300mm-1800mm
Duration(m) 200m-3000m
PARER Core 25mm(1inch),58mm(two.25inches),76mm(3inches)
BONDING Less THAN two

SPECIFICATION 25mic 27mic 28mic 30mic
MATT MATT MATT MATT
THICKNESS (mic) Base fifteen 15 eighteen 18
ADHESIVE 10 twelve 10 twelve
Whole 25 27 28 thirty
WEIGEPT m2/kg 44.twenty five forty one forty 37
kg/m2 .5716 .5714 .5712 .5711
WIDTH(mm) 300mm-1800mm
Length(m) 200m-3000m
PARER Main 25mm(1inch),58mm(two.25inches),76mm(3inches)
BONDING Significantly less THAN 2

BOPP Thermal Laminating Film

BOPP Thermal Laminating Film