Squander tire recycling EPT/Tire crusher/Crumb rubber EPT
Waste tire recycling EPT is to crush waste tires into rubber powEPTin different dimensions. The final rubber powEPTis with purity of 99.ninety nine%, can be employed to make rubber tiles, rubber mat, asphalt, waterproof material, filler of artificial grass.
The operating process of squander tire recycling crumb rubber EPT is:
waste tire—tire circle cutter—tire strip cutter—tire slice cutter—rims separator—rubber crusher—magnetic separator—fiber separator—rubber powder
Specification of waste tire recycling EPTs:
1. Tire circle cutter is used to reduce and open the joint of tire’s side and prime.
|
Identify |
Motor EPT |
Bodyweight |
Capability |
Tire specification |
|
Tire circle cutter |
4kw |
650kg |
40pcs/h |
650-1200mm (Each reinforced and nylon tires) |
2. Rims separator is used to individual the steel rims all around the tire to avoid the harm to the EPT.
|
Title |
Motor EPT |
Bodyweight |
Ability |
|
Rims separator |
7.5kw |
1300kg |
100pcs/h |
3. Tire strip cutter is used to cut the tire cirlce into strips 5×8 cm .
|
Title |
Motor EPT |
Weight |
Capacity |
Cutting size |
|
Tire strip cutter |
4kw |
850kg |
2.5t/h |
5x8cm |
four. Tire slice cutter is utilized to reduce the strips into tiny chunks about 3.5 cubic centimeter.
|
Name |
Motor EPT |
Excess weight |
Capacity |
Reducing size |
|
Tire slice cutter |
4kw |
800kg |
.8t/h |
3x5x8cm |
five. Primary rubber crusher is to crush the rubber blocks into powEPTin distinct sizes with purity of 99.99%.
| Design | Ability | Drum diameter | Drum length | Front roll linear | Roll speed ratio | Max roller spacing | Motor EPT |
| XKP-350 | 3ton | 300mm | 500mm | 26.2m/min | one:two.five | 8mm | 37kw |
| XKP-400 | 6ton | 400mm | 600mm | 34.5m/min | one:2.5 | 8mm | 45kw |
| XKP-450 | 8ton | 450mm | 760mm | 38.0m/min | one:2.5 | 8mm | 55kw/75kw |
| XKP-560 | 10ton | 560mm | 800mm | 38.6m/min | 1:2.5 | 8mm | 75kw/90kw |
| XKP-560D | 20ton | 560mm | 1000mm | forty two.5m/min | 1:2.five | 8mm | 132kw/160kw |
Rewards of our rubber crusher EPT:
1. Crusher roller speed ratio: Ours is one: two.five, even though the previous sort roller speed ratio is one: 1.38.
2. Roller composition: Our two rollers are the two grooved, which boost the friction and then enhance the output, although the outdated kind is 1 with groove, and the other is sleek.
three. Roller content: The roller is produced by Welding wear resistant alloy materials, 5Cr6MnMo. We can offer you you 3 a long time guarantee of the roller. Although the previous kinds EPT use cast iron to make the rollers, quite effortless to break or crack in two .
four. EPT attribute: Our EPT is energy preserving one/3. For case in point, generating 1T powder, our EPT electrical power use is only a hundred and fifty deg, even though their electricity usage is about 250- 280 deg in creating 1T powder.
five. Bearing: Our EPT use rolling bearing, there are eight items bearing inside, while the old EPT use the slide bearings ( bush) , which is not as very good as ours.
For far more info, make sure you really feel totally free to speak to us whenever.
/Mobile: 15738242977
